Ideal for size reduction of soft to medium-hard, tough-elastic and fibrous materials as well as for heterogeneous mixtures, Cutting Mills are indispensable in the areas of food, pharmaceutical industry, plastics, agriculture, forestry, construction materials, textiles, chemistry as well as for analytic and sample preparation for RoHS-analysis.
Unmatched ease of cleaning
An important criteria for Cutting Mills is how fast and simply can clean one in daily use? Easy cleaning has therefore been a critical focus when developing the FRITSCH PULVERISETTE 19.
While you’re still tightening screws on other mills, your FRITSCH Cutting Mill’s already clean
How? The entire grinding chamber can easily be opened in seconds plus both the rotor and the sieve can be removed with simple motions. Only with FRITSCH Cutting Mills is it possible to lift open the entire top part of the housing together with it’s door – in fact, the door may be completely removed. Yes, even the rotor in FRITSCH Cutting Mills can also be removed without tools for quick cleaning and may be turned by hand, when the mill is open. The result is a completely open and empty grinding chamber with minimal dead space that’s quick and easy to clean – secure protection against cross contamination.
NEW: Universal Cutting Mill PULVERISETTE 19 – in a corrosion-resistant stainless steel version 316L. Especially designed for applications in the food and pharmaceutical industry.
- Increased resistance to corrosive media such as alkalis and acids, but especially to chloride containing media.
- FDA compliant (Food and Drug Administration), as well as to regulation (EC) Nr. 1935/2004 of the European Parliament according to article 3, paragraph 1, compliant material in the food and pharmaceutical industry.
- Combines above this, the well-known advantages of the PULVERISETTE 19 standard version, such as handling and cleaning.
- Can be combined with the NEW Sample exhaust system with high-performance cyclone separator made of stainless steel 304. It ensures with its powerful vacuum function, based on negative pressure a simple feeding, fast throughput and good cooling and is especially recommended for analytical requirements.
By the way, FRITSCH offers 6 different models of Cutting Mills, with max. feed sizes from 70 x 70mm – 120 x 85mm, max. throughput from 50 l/h up to 85 l/h, final finesses from 0.2 – 20mm, rotational speeds from 300 – 3400 rpm and also in a corrosion resistant 316L version – for each application there’s a perfect cutting mill
Read this article in full at Labmate-Online