Fritsch ANALYSETTE 28 ImageSizer for rapid particle shape & size analysis

Particle Sizer ANALYSETTE 28 ImageSizer by FRITSCH_John Morris Scientific

The new ANALYSETTE 28 ImageSizer is the ideal instrument for analysis of particle shape and size of dry, free-flowing powders and bulk solids in a measuring range from 20 µm to 20 mm with Dynamic Image Analysis. Utilising the optical analysis of particle shape and particle size, damaged particles, contaminants, agglomerates and oversized or undersized particles are identified precisely and quickly with results viewed easily as single images. Naturally the instrument a fast and efficient particle size measurement at the same time. Measuring time may vary depending on the sample quantity, however any processing under 5 minutes will return an immediate result. As such this means the ANALYSETTE 28 ImageSizer is the ideal instrument for basic quality control, research and many laboratory tasks – this is a rapid alternative to sieving.

Low Cost and Rapid Alternative to Sieving
Does your lab often use sieve analyses? Then the ANALYSETTE 28 ImageSizer is your perfect, quick alternative using only three steps: load a sample, conduct measurement, review results; all completed without the need of a sieve stack o any complex clean-up. Cost savings are experienced given there’s no need for calibration or sieve purchase. In concert with particle size distribution, the particles’ shape will also be determined in results.

Quick Evaluation of Particle Shape and SizeParticle Sizer ANALYSETTE 28 ImageSizer by FRITSCH

  • Extra wide measuring range 20 μm – 20 mm, that’s individually adaptable
  • Superior camera with telecentric lenses
  • Extensive library for morphological analysis
  • Practical tools for reliable quality monitoring
  • Fast, simple operation via SOP control
  • Freely editable report generator for individual measurement reports.

High Performance Camera – Robust Lenses – Easy Operation
The key of the ANALYSETTE 28 ImageSizer is using a five megapixel camera, this offers the highest resolution of even the tiniest particles. Telecentric lenses assure absolutely distortion-free individual particle images in the same scale wherever this is located in your measurement volume.

Excellent Sample Flowrate through a Controlled Feeder
A U-shaped representation of the feeder channel guarantees favourable material feed. Particle concentration is driven and regulated by the AutoCheck function. The optimal feed rate for the feeder can be set in relation to the sample properties in the SOP.  Your key advantage is that this reliable process offers the optimum number of particles per image for meaningful analysis.

FRITSCH-Cloud – Effortless Analysis with a Glance
Even the evaluation of the measuring results is uniquely straightforward with an ANALYSETTE 28. Your evaluation software ISS displays each recorded particle clearly as a data point within the always-live FRITSCH Cloud. The morphology is illustrated by the position of the data point within the Cloud. Choose which statement is appears most applicable: Sphericity in regards to the Minimum Feret Diameter, aspect ratio, applied on the porosity, or the convexity as a function of the particle Cross Section. See multiple measurements charted simultaneously and you’ll observe sample differences straight away.

FRITSCH-Plus: Report Generator with Easy Set-up
To clearly arrange and display results via monitor (or via browser), as cumulative curve, as bar diagram or in table form. Alternately a layout may be defined according to your sieve analysis. Print out will occur as soon as you’re satisfied with results displayed on your monitor.

Read the brochure: FRITSCH ANALYSETTE 28 ImageSizer

Watch the FRITSCH Particle Sizer ANALYSETTE 28 ImageSizer video

Read more of this article at LabmateOnline

Need to know more about a FRITSCH ANALYSETTE 28 ImageSizer?
Talk to our experts in the Laboratory team today
Freecall AUS. 1800 251 799 and NZ. 0800 651 700

Photo Gallery Slideshow

Leave a comment

Your email address will not be published.